Sale!

Backcountry Climb Pro Splitboard + Kohla Skins + Union Explorer 2022/23

1.139,47

In Mendiboard we offer you this Splitboard Set. In the Pack we include the following: Splitboard Backcountry, Union Explorer Bindings and Kohla Climbing Skins.

The setup is supplied mounted stance and angles as customer’s instructions.

We want the Splitboard to be a bit more accessible for everyone.

2 Years Warranty.

FREE SHIPPING TO EUROPE & AMERICA.

Delivery time to América 7/9 days.

Delivery time to Europe 3/4 days.

Delivery time to Spain 48/72h.

 

*Orders that comes out of European Union are FREE of TAX (-155€). For more information please contact us in mendiboard@gmail.com

Clear

    If desired, the splitboads are delivered at no additional cost with the interface assembled according to stance and angulations indicated, skins cut to size and specifying us if you are goofy or regular. You can give us all this information in the following form. For any other doubt you can also write here or call us at +34 629 91 40 49.

    Name (required)

    Email (required)

    Message

    Enter the numbers captcha

    I have read and accept the privacy policy


    SKU PACK BACKCOUNTRY UNION EXPLORER-1-1 Category Tags ,


    Share

    NEW SPLITBOARD CLIMB PRO BACKCOUNTRY 

    Traditional camber profile and directional boards, thought about give maximum performance on the ascent and an optimal behavior in the descent in the wide range of snows types of our mountains.

    Just like its sibling the Classic Backcountry Splitboard, the New Backcountry Climb Pro Splitboardhas a number of improvements over its predecessor. The new Backcountry is 10% lighter than its predecessor, thanks to the paulownia wood used in the construction of its core, which together with poplar and bamboo give it the same flexing and torsion behavior as its predecessor but a 10 % lighter. Two holes have also been added at the tip to place the skins, avoiding the use of the classic buckles, which will allow us to mount the splitboard in descent mode without having to remove the seal skins, with this we will prevent the board from falling down the mountain due to carelessness. below, so once the split board is assembled, we’ll remove the skins to begin our descent.

    The New shape of Backcountry Climb Pro splitboard (like the Nimbus and Pro Carbon splitboards ), is a splitboard with a V-shaped tip and tail. This new shape gives it a more ski shape when the board ii is on touring mode, with a new position of the clips somewhat further away from the tip and tail. With this new shape, more similar to a conventional ski, we avoid edges with closed angles and move them further away from the inner edge. This, together with the new position of the clips further back towards the center of the board, allows ascending without inverting the two halves of the board, avoiding angled edges and clips colliding with each other. And what are advantages by not inverting the two halves of the board? Touring with the straight edges towards the inside is safer and more efficient, since the “sidecut depth” in the valley half board (the half of the splitboard that is closest to the valley on a diagonal) is reduced to zero, making the half board flex less when stepped on and grip better on hard snow. But why do we move the straight edge to the valley half board? The valley half is the one that is most difficult for us to grasp because it is further away from our balance point, therefore we transfer the curved edge to the mountain half (closer to our balance point) and move the straight edge to the valley to compensate that it is further from our balance point. In addition, we must remember that this improvement in the grip of the valley half  makes the “quick turn” safer and more efficient, where the support in the valley half board is total. Very important: It is recommended that touring without inverting the two halves when we already have experience in touring and we do it with the two halves in parallel and in a more instinctive way. It is not advisable not to invert them when we go along the trace of a skier, since being narrower, we could collide the two halves more easily.

    Traditional and directional camber profile boards, designed to give maximum performance in the ascent and optimal behavior in the descent in the wide range of snow types in our mountains.

    Our splitboards have a long contact surface with the snow, which will undoubtedly give us more grip when climbing the mountains. Presented as a very versatile board that makes us enjoy both hard days, being a reactive board, and days of deep snow thanks to its rocker, nose shape and height, a high-performance sintered black base that give us a extra speed, which together with its setback (rear position) will help us buoyancy in deep snow.

    Its Flex 8 provides the optimal stiffness for Big Mountain riders.

    Splitboard received the Editor’s Choice award for splitboard tested by the specialized interactive splitboard magazine, splitboarding.eu. In addition to this recognition, it has achieved the best score in the WP-Score (price / weight ratio) of all the selected splitboards.

     

    2 Years Warranty.

    UNION EXPLORER BINDINGS

    Only when your splitboard binding feels like a normal snowboard binding can you enjoy the descent to the fullest. The Union Explorer binding therefore focuses on natural board feeling, less moving parts and a robust design, made for the longest tours and steepest lines.
     
    The Union Split System is simple and very quick to use. To switch to ride mode, simply place the binding on the disc mounted to the board, slide the long pin under the baseplate and you’re done. To switch to walk mode, pull the pin out again, place the binding on the touring brackets and push the pin back in. The EXP2 Highback was developed specifically for splitboarding. It comes with a quick release for the tilt angle (Forward Lean). This allows you to switch from touring to ride mode with just one hand movement. The ExoFrame 4.0 ankle straps are the ultimate connection between boot and binding. The progressive flex allows for quick response and power transfer for demanding riding at high speeds.
     
    All necessary mounting parts, Quiver Disk, Splitboard Strap, Touring Bracket

    KOHLA CLIMBING SKINS

    New KOHLA Mixed climbing skins (70% Mohair, 30% Nylon). Excellent traction / slip ratio. Its lightness is appreciated on the longest and most demanding routes. Its reduced volume once folded and stored in its bag takes up less space in our backpack. Supplied with protective mesh, carrying bag and tail-clip to be able to hook not only on the tip but also on the back.

    The skins are supplied with transport bag, protector for the glue area and hook for the tail of the board. We can also cut them to size if desired.

    Corte transversal de un splitboard
    Tabla de medidas de una tabla Backcountry de Mendiboard

    NEW SPLITBOARD CLIMB PRO BACKCOUNTRY 

    Traditional camber profile and directional boards, thought about give maximum performance on the ascent and an optimal behavior in the descent in the wide range of snows types of our mountains.

    Just like its sibling the Classic Backcountry Splitboard, the New Backcountry Climb Pro Splitboardhas a number of improvements over its predecessor. The new Backcountry is 10% lighter than its predecessor, thanks to the paulownia wood used in the construction of its core, which together with poplar and bamboo give it the same flexing and torsion behavior as its predecessor but a 10 % lighter. Two holes have also been added at the tip to place the skins, avoiding the use of the classic buckles, which will allow us to mount the splitboard in descent mode without having to remove the seal skins, with this we will prevent the board from falling down the mountain due to carelessness. below, so once the split board is assembled, we’ll remove the skins to begin our descent.

    The New shape of Backcountry Climb Pro splitboard (like the Nimbus and Pro Carbon splitboards ), is a splitboard with a V-shaped tip and tail. This new shape gives it a more ski shape when the board ii is on touring mode, with a new position of the clips somewhat further away from the tip and tail. With this new shape, more similar to a conventional ski, we avoid edges with closed angles and move them further away from the inner edge. This, together with the new position of the clips further back towards the center of the board, allows ascending without inverting the two halves of the board, avoiding angled edges and clips colliding with each other. And what are advantages by not inverting the two halves of the board? Touring with the straight edges towards the inside is safer and more efficient, since the “sidecut depth” in the valley half board (the half of the splitboard that is closest to the valley on a diagonal) is reduced to zero, making the half board flex less when stepped on and grip better on hard snow. But why do we move the straight edge to the valley half board? The valley half is the one that is most difficult for us to grasp because it is further away from our balance point, therefore we transfer the curved edge to the mountain half (closer to our balance point) and move the straight edge to the valley to compensate that it is further from our balance point. In addition, we must remember that this improvement in the grip of the valley half  makes the “quick turn” safer and more efficient, where the support in the valley half board is total. Very important: It is recommended that touring without inverting the two halves when we already have experience in touring and we do it with the two halves in parallel and in a more instinctive way. It is not advisable not to invert them when we go along the trace of a skier, since being narrower, we could collide the two halves more easily.

    Traditional and directional camber profile boards, designed to give maximum performance in the ascent and optimal behavior in the descent in the wide range of snow types in our mountains.

    Our splitboards have a long contact surface with the snow, which will undoubtedly give us more grip when climbing the mountains. Presented as a very versatile board that makes us enjoy both hard days, being a reactive board, and days of deep snow thanks to its rocker, nose shape and height, a high-performance sintered black base that give us a extra speed, which together with its setback (rear position) will help us buoyancy in deep snow.

    Its Flex 8 provides the optimal stiffness for Big Mountain riders.

    Splitboard received the Editor’s Choice award for splitboard tested by the specialized interactive splitboard magazine, splitboarding.eu. In addition to this recognition, it has achieved the best score in the WP-Score (price / weight ratio) of all the selected splitboards.

    UNION EXPLORER BINDINGS

    Only when your splitboard binding feels like a normal snowboard binding can you enjoy the descent to the fullest. The Union Explorer binding therefore focuses on natural board feeling, less moving parts and a robust design, made for the longest tours and steepest lines.
     
    The Union Split System is simple and very quick to use. To switch to ride mode, simply place the binding on the disc mounted to the board, slide the long pin under the baseplate and you’re done. To switch to walk mode, pull the pin out again, place the binding on the touring brackets and push the pin back in. The EXP2 Highback was developed specifically for splitboarding. It comes with a quick release for the tilt angle (Forward Lean). This allows you to switch from touring to ride mode with just one hand movement. The ExoFrame 4.0 ankle straps are the ultimate connection between boot and binding. The progressive flex allows for quick response and power transfer for demanding riding at high speeds.
     
    All necessary mounting parts, Quiver Disk, Splitboard Strap, Touring Bracket

    KOHLA CLIMBING SKINS

    New KOHLA Mixed climbing skins (70% Mohair, 30% Nylon). Excellent traction / slip ratio. Its lightness is appreciated on the longest and most demanding routes. Its reduced volume once folded and stored in its bag takes up less space in our backpack. Supplied with protective mesh, carrying bag and tail-clip to be able to hook not only on the tip but also on the back.

    The skins are supplied with transport bag, protector for the glue area and hook for the tail of the board. We can also cut them to size if desired.

    Corte transversal de un splitboard
    Tabla de medidas de una tabla Backcountry de Mendiboard
    Additional information
    Size

    145, 161W, 153, 157, 161

    Size

    L, M, S

    Reviews

    There are no reviews yet.

    Be the first to review “Backcountry Climb Pro Splitboard + Kohla Skins + Union Explorer 2022/23”

    Llama Ahora: 629 914 049
    Abrir chat