Pack Sunnmore Splitboard + Spark Surge + Kohla Skins + Spark Pucks
At Mendiboard we offer you this Splitboard Pack. In the pack we include the following: SUNNMORE Splitboard, Spark ARC bindings, Voile Pucks and Kohla Seal Skins.
We want to make the Splitboard a little more accessible for everyone.
2 years warranty.
Available on back-order
SUNNMORE SPLITBOARDSplitboard Mendiboard 100% designed for powder days, looking for optimal performance also on other types of snow thanks to its traditional camber profile.
We continue with our philosophy of traditional camber to have a great support of the board to help us both in the ascent and the descent in the most complicated snow but has been given a rocker in the tip of 40cm, not in the tail to not lose contact edge, which will delight lovers of powder snow. The board has a flex 7 in the camber for more pop and response and a flex 6 in the nose for better floatability and better riding in deep snow. Its polydamide top sheet gives it a very good ratio of lightness, scratch resistance and durability. We are once again going for German quality with an Isosport 7500 sintered sole, a very hard and very fast sole.SPARK SURGE BINDINGS
The Spark Surge binding is one of the lightest on the market. Its highback allows an angulation of 22º to -13º for greater comfort when jibbing. It has a single riser in two positions, one for gentle slopes and the other for moderate slopes. The binding includes the toe with Tesla system and the toe support or heel support. The new Pilow Line Straps are 46% lighter and have a tab that makes it easier to attach the toe strap. Compatible with IBEX blades, for safe jibbing in harder snow conditions.
KOHLA CLIMBING SKINSMixed Kohla climbing skins (70% Mohair, 30% Nylon). Excellent traction/slide ratio. Their lightness is appreciated in the longest and most demanding routes. Its reduced volume once folded and stored in its bag takes up less space in our backpack. Supplied with protective netting and carrying bag.Warning: Do not dry the skins near a heat source. Do not store sealskins next to each other, always use the protective netting to collect and store them.
SPARK PUCKS
Spark pucks are the plastic parts needed to place the bindings in descent mode. The kit includes the 4 pucks, the support rubbers, the template and the screws necessary for assembly.
SUNNMORE SPLITBOARDSplitboard Mendiboard 100% designed for powder days, looking for an optimal performance also in other types of snow thanks to its traditional camber profile.
We continue with our philosophy of traditional camber to have a great support of the board to help us both in the ascent and the descent in the most complicated snow but has been given a rocker in the tip of 40cm, not in the tail to not lose contact edge, which will delight lovers of powder snow. The board has a flex 7 in the camber for more pop and response and a flex 6 in the nose for better floatability and better riding in deep snow. Its polydamide top sheet gives it a very good ratio of lightness, scratch resistance and durability. The Isosport 7500 sintered Isosport outsole, a very hard and very fast outsole, is once again the quality of the German company.
SPARK SURGE BINDINGS
The Spark Surge binding is one of the lightest on the market. Its highback allows an angulation of 22º to -13º for greater comfort when jibbing.
It has a single riser in two positions, one for gentle slopes and the other for moderate slopes. The binding includes the toe with Tesla system and the toe support or heel support. The new Pilow Line Straps are 46% lighter and have a tab that makes it easier to attach the toe strap. Compatible with IBEX blades, for safe jibbing in harder snow conditions.
KOHLA CLIMBING SKINSMixed Kohla climbing skins (70% Mohair, 30% Nylon). Excellent traction/slide ratio. Their lightness is appreciated in the longest and most demanding routes. Its reduced volume once folded and stored in its bag takes up less space in our backpack. Supplied with protective netting and carrying bag.Warning: Do not dry the skins near a heat source. Do not store sealskins next to each other, always use the protective netting to collect and store them.
SPARK PUCKS
Spark pucks are the plastic parts needed to place the bindings in descent mode. The kit includes the 4 pucks, the support rubbers, the template and the screws necessary for assembly.
I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.