Just like its parner the Classic Backcountry Splitboard, the New Shape Backcountry Splitboard has a number of improvements over its predecessor. The new Backcountry is 10% lighter than its predecessor, thanks to the paulownia wood used in the construction of its core, which together with poplar and bamboo give it the same flexing and torsion behavior as its predecessor but a 10 % lighter. Two holes have also been added at the tip to place the skins, avoiding the use of the classic buckles, which will allow us to mount the splitboard in descent mode without having to remove the seal skins, with this we will prevent the board from falling down the mountain due to carelessness. below, so once the split board is assembled, we’ll remove the skins to begin our riding.

The New Shape Backcountry splitboard (like the Nimbus and Pro carbon Splitboards), is a splitboard with a V-shaped tip and tail. This new shape gives it a more ski shape when the board is split uphill, with a new position of the clips somewhat further away from the tip and tail. With this new shape more similar to a conventional ski, we avoid edges with sharp angles and move them further away from the inner edge. This, together with the new position of the clips further back towards the center of the table, allows ascending without inverting the two halves of the board, avoiding edges and clips colliding in the touring mode. And what are the improvements by not inverting the two halves of the board? Approaching with the straight edges inwards is safer and more efficient, since the “sidecut depth” in the valley half (the half of the splitboard that is closest to the valley on a diagonal) is reduced to zero, making the skate flex less when stepped on and grip better on hard snow. But why do we move the straight edge to the valley half? The valley half is the one that is most difficult for us to grasp because it is farthest from our balance point, therefore we move the curved edge to the mountain half (closer to our balance point) and move the edge straight to the valley to compensate that it is further from our balance point. In addition, we must remember that this improvement in the grip of the valley half makes the “quick turn” safer and more efficient, where the support in the valley half is total. Very important: It is recommended to ascent without inverting the two halves when we already have experience on touring and we do it with the two halves in parallel already in a more instinctive way. It is not advisable not to invert them when we go along the track of a skier, since being narrower, we could collide the two halves more easily.

Traditional and directional camber profile boards, designed to give maximum performance in the ascent and optimal behavior in the descent in the wide range of snow types in our mountains.

Our splitboards have a long contact surface with the snow, which will undoubtedly give us more grip when climbing the mountains. Presented as a very versatile board that makes us enjoy both hard days, being a reactive board, and days of deep snow thanks to its rocker, nose shape and height, a high-performance sintered black base that give us a extra speed, which together with its setback (rear position) will help us buoyancy in deep snow.

Its Flex 8 provides the optimal stiffness for Big Mountain riders.

Splitboard received the Editor’s Choice award for splitboard tested by the specialized interactive splitboard magazine, splitboarding.eu. In addition to this recognition, it has achieved the best score in the WP-Score (price / weight ratio) of all the selected splitboards.

Measurements: 145, 149, 153, 157, 161 & 161w

Traditional and directional camber profile boards, designed to give maximum performance in the touring mode and optimal behavior in the ride modet in the wide range of types of snow  and terrains of our mountains.

Our splitboard boards have a long contact surface with the snow, which will give us more grip in touring mode climbing mountains. On the ride mode it is presented as a very versatile board that makes us enjoy both hard days, being a reactive board, and deep snow days thanks to its rocker, shape and nose height, a sintered black base that gives us an extra speed, which together with its setback (delayed position) that will help us float in deep snow. Shorter turning radius than its predecessor, making it the perfect companion for closed forests.

This is a splitboard for people looking to have fun with a responsive board regardless of mountain conditions.

Available in three lengths 152, 156 and 160.

New Mendiboard Pro Carbon Series, one of the lightest splitboard in the market.. New shape, new heights, new lengths, base free of screws using inserts for hooks, 7 lines of inserts for a greater range of rider position depending on our descent style (freestyle / freeride), tabs on the tail for a simple and effective climbing skins tension …

Traditional and directional camber profile boards, designed to give maximum performance in the touring mode and optimal behavior in the ride modet in the wide range of types of snow  and terrains of our mountains.

Our splitboard boards have a long contact surface with the snow, which will give us more grip in touring mode climbing mountains. On the ride mode it is presented as a very versatile board that makes us enjoy both hard days, being a reactive board, and deep snow days thanks to its rocker, shape and nose height, a sintered black base that gives us an extra speed, which together with its setback (delayed position) that will help us float in deep snow. Shorter turning radius than its predecessor, making it the perfect companion for closed forests.

This is a splitboard to people that are looking for light equipment for long and physically exigent routes. A splitboard that thanks to its shape, heights and profile, has an excellent behavior in different types of snow and terrain, even for closed and narrow terrain. 

Available in three lengths 152, 156 and 160.

The new Backcountry splitboard has a number of improvements over its predecessor. The new Backcountry is 10% lighter than its predecessor, thanks to the paulownia wood used in the construction of its core, which together with poplar and bamboo give it the same flex and torsion behavior as its predecessor but a 10 % lighter. Two holes have also been added at the tip to place the skins, avoiding using the classic buckles, which will allow us to mount the splitboard in descent mode without having to remove the sealskins, with this we will prevent the board from falling into the mountains due to carelessness. down, so once splitboard is assembled, we will remove the skins to begin our descent.

Traditional and directional camber profile boards, designed to give maximum performance in touring mode and optimal behavior in ride mode in the wide range of types of snow and terrain in our mountains.

Our splitboards have a long contact surface with the snow, which will  give us more grip when climbing mountains. Presented as a very versatile board that makes us enjoy both hard days, being a reactive board, and deep snow days thanks to its rocker, shape and nose height, a high-performance sintered black base that gives us a extra speed, which together with its setback (delayed position) will help us float in deep snow.

Its Flex 8 provides optimal stiffness for Big Mountain riders.

Splitboard received the Editor’s Choice award as a splitboard tested by the interactive magazine specializing in splitboard, splitboarding.eu. In addition to this recognition, it has achieved the best score in the WP-Score (price / weight ratio) of all the selected splitboards.

Traditional camber profile and directional board, with a long rocker at the tip specially designed for riding in deep snow.

Our splitboards have a long contact surface, which will undoubtedly give us more grip when climbing mountains. Presented as a very versatile board that will make us enjoy both the hard days being a reactive board, and the days of deep snow thanks to its long rocker in the nose it will help us buoyancy, without penalizing stability at high speeds. Thanks to the carbon sheets, the weight of the boards has been reduced, with an optimal behavior of their torsional or reactive qualities. Its medium flex between camber and its soft flex in the nose, make a surfable board very fun.

If you want to surf your mountains, this is your splitboard.